Hygiene
HMI SOLUTIONS
GTH easy 48
The stainless steel support arm systems GTH easy 48 were developed for the use in particularly demanding or sensitive areas. The GTH easy 48 convinces by as few edges and gaps as possible at the components and allows in combination with bent tubes hardly dead spaces. Due to the high protection class of IP66 and IP69, the system can be cleaned without any problems even under the most difficult conditions.
The GTH easy 48 is the small system with a 48 round tube diameter.
| Material | Tube: stainless steel 1.4301 System components: stainless steel 1.4305 |
|---|---|
| Ingress Protection | IP 69 according to EN 60529 |
| Surface | Tube: ground, grain size 240 |
| Free cable passage | 41 mm |
| Operating temperature range | -25 °C to +60 °C |
Components and pipe fully assembled on request
*570366000 – Suitable for tensile, compressive and tangential loads.
*570373000 – Suitable for tensile and compressive loads.
The 3D data displayed may differ from the current status due to changes and data reductions and may not always be up to date immediately.
| Image | Art.-No. | Type | Rotatable | Weight | 3D Data | Drawing | Request |  | 570300050 | Tube type I 0.5m | No | 1.76 kg |  | 570300100 | Tube type I 1m | No | 3.53 kg |  | 570300150 | Tube type I 1.5m | No | 5.3 kg |  | 570300998 | Pipe type I, special length | No | - |  | 570301050 | Tube type J 0.5/0.3/0.3m | No | 3.51 kg |  | 570301070 | Tube type J 0.75/0.75/0.3m | No | 5.97 kg |  | 570301100 | Tube type J 1.0/0.75/0.3m | No | 6.85 kg |  | 570301998 | Pipe type J, special length | No | - |  | 570302050 | Tube type S 0.5/0.3/0.3m | No | 3.52 kg |  | 570302100 | Tube type S 1.0/0.3/0.3m | No | 5.29 kg |  | 570302998 | Pipe type S, special length | No | - |  | 570366000 | Top-mounted joint | Yes | 3.2 kg |  | 570373000 | Coupling | Yes | 0.993 kg |  | 570376000 | Console adapter | No | 0.637 kg |  | 570379000 | Wall console | No | 2.23 kg |
|---|
Suitable Flat Panel-Adapter for mounting control enclosures and IPCs
| Image | Art.-No. | Type | Rotatable | Weight | 3D Data | Drawing | Request |  | 501020100 | FPA GTS, VESA75 | Yes | 1.89 kg |  | 501020200 | FPA GTS, VESA100 | Yes | 1.81 kg |  | 501020990 | FPA GTS, customized | Yes | - |  | 501030100 | FPA GTH easy 48, VESA75 | Yes | 2.39 kg |  | 501030200 | FPA GTH easy 48, VESA100 | Yes | 2.31 kg |  | 501030990 | FPA GTH easy 48, customized | Yes | - |  | 502020100 | FPA GTS with inclining adapter, VESA75 | Yes | 5.26 kg |  | 502020200 | FPA GTS with inclining adapter, VESA100 | Yes | 5.18 kg |  | 502020990 | FPA GTS with inclining adapter, customized | Yes | - |  | 502030100 | FPA GTH easy 48 with inclining adapter, VESA75 | Yes | 5.76 kg |  | 502030200 | FPA GTH easy 48 with inclining adapter, VESA100 | Yes | 5.68 kg |  | 502030990 | FPA GTH easy 48 with inclining adapter, customized | Yes | - |  | 503040100 | FPA GTN II, VESA75 | Yes | 4.11 kg |  | 503040200 | FPA GTN II, VESA100 | Yes | 4.03 kg |  | 503040990 | FPA, GTN II customized | Yes | - |
|---|
HMI SOLUTIONS
The GTH 48 and GTH 60 stainless-steel supporting-arm systems have been developed for use in particularly harsh and particularly sensitive areas.
HMI SOLUTIONS
The GTH 48 and GTH 60 stainless-steel supporting-arm systems have been developed for use in particularly harsh and particularly sensitive areas.
HMI SOLUTIONS
The stainless steel support arm system GTH easy 60 was developed for use in particularly demanding or sensitive areas.