HMI SOLUTIONS

Limanda

The Limanda enclosure system can be used for both mobile and stationary purposes. The polyamide enclosure is of Degree of Protection IP 65 (in acc. with EN 60529), is self-extinguishing (in acc. with UL 94 V-2) and has a surface resistance of 1012 Ohm (in acc. with IEC 60093). Displays, control systems, membrane keypads, etc., can be installed via the front panel. ROSE can also perform this as an individual preparation service.

Two different sizes are available:

Limanda 1: 311 x 281 x 72 mm
Limanda 2: 270 x 248 x 64 mm

The use of additional intermediate frames makes it possible to increase installation depth by 25/30 mm.

The front panel has a maximum assignment area of:

Limanda 1: 257 x 182 mm
Limanda 2: 225 x 160 mm

Here, too, ROSE can provide an individual preparation service to adapt the cut-out in the upper section of the enclosure to your needs if the allocation area is not sufficient.

All Limanda Handheld Enclosures

Fields of Application

For both mobile and stationary purposes
Displays, controls, membrane keyboards etc.
Individual processing service

Product highlights

Polyamide hand held enclosure for MCR, automation engineering and data acquisition
For installations and command devices mobile and stationary applicable
Variable mounting depths

Service

Technical data

Material	Housing: Polyamide Impact edge: NBR, black
Ingress Protection	IP 65 according to EN 60529
Surface resistance	10¹² Ohm, IEC 60093
Flammability	UL 94 V-2
Colour	RAL 7021, black grey
Operating temperature range	-20° C to +60° C

Scope of delivery

Double-shell housing with upper and lower shells, each with mounting domes including seals and impact edge profile. 3 cover caps for interface garages, screws and mounting material for front panel mounting.