Limanda

The Limanda enclosure system can be used for both mobile and stationary purposes. The polyamide enclosure is of Degree of Protection IP 65 (in acc. with EN 60529), is self-extinguishing (in acc. with UL 94 V-2) and has a surface resistance of 1012 Ohm (in acc. with IEC 60093). Displays, control systems, membrane keypads, etc., can be installed via the front panel. ROSE can also perform this as an individual preparation service.

Two different sizes are available:

  • Limanda 1:       311 x 281 x 72 mm
  • Limanda 2:       270 x 248 x 64 mm

The use of additional intermediate frames makes it possible to increase installation depth by 25/30 mm.

The front panel has a maximum assignment area of:

  • Limanda 1:       257 x 182 mm
  • Limanda 2:       225 x 160 mm

Here, too, ROSE can provide an individual preparation service to adapt the cut-out in the upper section of the enclosure to your needs if the allocation area is not sufficient.

Included in delivery

Clam sheel enclosure with top and base, each with fixing domes incl. seals and border profile,

3 cover flaps for interface garages, screws and fixing materials for front panel mounting.

Technical Data

Material

Enclosure: Polyamide

border profile: NBR, black

Colour

RAL 7021, schwarzgrau

Ingress protection

IP 65 to EN 60529

Flammability

UL 94 V-2

Surface resistance

1012 Ohm to IEC 60093

Temperature range

-20°C to +60°C

Product Range
ProduktbildOrder-No. Dimensions H x W x D (mm)TypePDF3DDatasheetAccessoriesInquiry
27.03 02 00

270 x 248 x 64

Limanda II


Cable connection with bending protection (no lock nut)08.10 01 16M16 x 1,5

Cable connection with bending protection (no lock nut)08.10 01 20M20 x 1,5

Cable connection with bending protection (no lock nut)08.10 01 25M25 x 1,5

Holder27.03 00 84

Carrying strap27.03 00 85Carrying strap in 2 versions:<br/>Standard and comfort: strengthened execution with shoulder pad.

Table stand27.03 00 87

Quiver27.03 00 89for Limanda II

Quiver27.03 00 91for Limanda II with intermediate frame

Carrying strap27.03 00 92Carrying strap in 2 versions:<br/>Standard and comfort: strengthened execution with shoulder pad.

Front plate27.03 02 80

Intermediate frame27.03 02 81

Mounting set27.03 02 82

Inclining adapter50.02 00 05for mounting directly to GT 48/2 tube

Inclining adapter50.02 00 06Direct fitting to GTK electronic profile

Inclining adapter50.02 00 07Direct fitting to wall or machine

27.03 02 01

270 x 248 x 64

Limanda II EMC


Cable connection with bending protection (no lock nut)08.10 01 16M16 x 1,5

Cable connection with bending protection (no lock nut)08.10 01 20M20 x 1,5

Cable connection with bending protection (no lock nut)08.10 01 25M25 x 1,5

Holder27.03 00 84

Carrying strap27.03 00 85Carrying strap in 2 versions:<br/>Standard and comfort: strengthened execution with shoulder pad.

Table stand27.03 00 87

Quiver27.03 00 89for Limanda II

Quiver27.03 00 91for Limanda II with intermediate frame

Carrying strap27.03 00 92Carrying strap in 2 versions:<br/>Standard and comfort: strengthened execution with shoulder pad.

Mounting set27.03 02 82

Intermediate frame27.03 02 88

Front plate27.03 02 90

Inclining adapter50.02 00 05for mounting directly to GT 48/2 tube

Inclining adapter50.02 00 06Direct fitting to GTK electronic profile

Inclining adapter50.02 00 07Direct fitting to wall or machine

27.03 03 00

311 x 281 x 72

Limanda I


Cable connection with bending protection (no lock nut)08.10 01 16M16 x 1,5

Cable connection with bending protection (no lock nut)08.10 01 20M20 x 1,5

Cable connection with bending protection (no lock nut)08.10 01 25M25 x 1,5

Handle set27.03 00 83for Limanda I without push button

Holder27.03 00 84

Carrying strap27.03 00 85Carrying strap in 2 versions:<br/>Standard and comfort: strengthened execution with shoulder pad.

Quiver27.03 00 86for Limanda I

Quiver27.03 00 90for Limanda I with intermediate frame

Carrying strap27.03 00 92Carrying strap in 2 versions:<br/>Standard and comfort: strengthened execution with shoulder pad.

Front plate27.03 03 80

Intermediate frame27.03 03 81

Inclining adapter50.02 00 05for mounting directly to GT 48/2 tube

Inclining adapter50.02 00 06Direct fitting to GTK electronic profile

Inclining adapter50.02 00 07Direct fitting to wall or machine

Handle setxxxx_handle set_415 for Limanda 1 with 3-step enabling switch, right

Handle setxxxx_handle set_765for Limanda 1 with 3-step enabling switch, left

27.03 03 01

311 x 281 x 72

Limanda I EMC


Cable connection with bending protection (no lock nut)08.10 01 16M16 x 1,5

Cable connection with bending protection (no lock nut)08.10 01 20M20 x 1,5

Cable connection with bending protection (no lock nut)08.10 01 25M25 x 1,5

Handle set27.03 00 83for Limanda I without push button

Holder27.03 00 84

Carrying strap27.03 00 85Carrying strap in 2 versions:<br/>Standard and comfort: strengthened execution with shoulder pad.

Quiver27.03 00 86for Limanda I

Intermediate frame27.03 00 88

Quiver27.03 00 90for Limanda I with intermediate frame

Carrying strap27.03 00 92Carrying strap in 2 versions:<br/>Standard and comfort: strengthened execution with shoulder pad.

Front plate27.03 03 90

Inclining adapter50.02 00 05for mounting directly to GT 48/2 tube

Inclining adapter50.02 00 06Direct fitting to GTK electronic profile

Inclining adapter50.02 00 07Direct fitting to wall or machine

Handle setxxxx_handle set_415 for Limanda 1 with 3-step enabling switch, right

Handle setxxxx_handle set_765for Limanda 1 with 3-step enabling switch, left

27.03 03 17

311 x 281 x 97

Limanda I for OP17


Cable connection with bending protection (no lock nut)08.10 01 16M16 x 1,5

Cable connection with bending protection (no lock nut)08.10 01 20M20 x 1,5

Cable connection with bending protection (no lock nut)08.10 01 25M25 x 1,5

Handle set27.03 00 83for Limanda I without push button

Holder27.03 00 84

Carrying strap27.03 00 85Carrying strap in 2 versions:<br/>Standard and comfort: strengthened execution with shoulder pad.

Quiver27.03 00 90for Limanda I with intermediate frame

Carrying strap27.03 00 92Carrying strap in 2 versions:<br/>Standard and comfort: strengthened execution with shoulder pad.

Intermediate frame27.03 03 81

Inclining adapter50.02 00 05for mounting directly to GT 48/2 tube

Inclining adapter50.02 00 06Direct fitting to GTK electronic profile

Inclining adapter50.02 00 07Direct fitting to wall or machine