For high-maintenance areas
HMI SOLUTIONS
Commander 410
The robust Commander 410 is a stainless-steel control enclosure for intensively cleaned locations. Thanks to its surface quality (polished to 240 grain), high material quality (1.4404 / 316L), blue silicone seal and integrated droop, this stainless-steel control enclosure is particularly suitable for use in intensively cleaned locations.
The droop prevents the accumulation of water, and permits rapid run-off in case of frequent cleaning.
The operating temperature range is -40°C to +80°C and the Commander 410 is therefore frequently used in the foodstuffs, luxuries and packing-machinery sectors.
The enclosure features a coupling hole for fitting of the GTH 48 supporting-arm system. The addition of the optional stainless-steel handles assures extremely good user-friendliness.
The Commander 410 is available in six sizes, from 380 x 250 x 150 mm to 500 x 450 x 220 mm. Special sizes are available for orders of twenty-five enclosures or more.
Fields of Application
Product Highlights
Service
| Material | Stainless steel 1.4404/316L |
|---|---|
| Surface | Ground, grain size 240 |
| Seal | Silicone |
| Ingress protection | IP 66 / IP 69 according to EN 60529 |
| Temperature range | -40 °C to +80 °C |
Housing with screwed rear panel, silicone seal – depending on the version, with closed or individually machined housing front, internal fastening and coupling bore GTH 48
The 3D data displayed may differ from the current status due to changes and data reductions and may not always be up to date immediately.
HMI SOLUTIONS
The stainless-steel Commander 420 has been specially conceived for industrial applications.
HMI SOLUTIONS
The C450 features a high surface quality and is the optimal control enclosure for your applications due to the high-quality handle variants and the choice of different enclosure sizes.
HMI SOLUTIONS
The Commander KSSC is based on the tried and proven KSS stainless-steel enclosure.