Aluminium extrusion
HMI SOLUTIONS
GTK 80
Maximum load is 200 kg at a reach of 1.20 m.
The system consists essentially of square-section steel tubes with an edge length of 80 mm and a wall thickness of, optionally, 5 mm or 8 mm.
These steel tubes are embedded in a sectional aluminium extrusion which simultaneously accommodates the cable duct.
The cable duct has a removable cover which can be easily opened to permit installation of cables.
The components consist of cast steel and can be joined to the tubes by means of clamping screws.
Fields of Application
Product Highlights
Service
Load diagram
The 3D data displayed may differ from the current status due to changes and data reductions and may not always be up to date immediately.
| Image | Art.-No. | Type | Rotatable | Weight | 3D Data | Drawing | Request |  | 100941658 | Cable duct (variable length) | No | - | | 100941688 | Steel tube 80 x 80 x 8 mm (variable length) | No | - | | 100942310 | Steel tube 80 x 80 x 8 mm (0,5 m) | No | 8.4 kg | | 100942320 | Steel tube 80 x 80 x 8 mm (1 m) | No | 17.8 kg | | 100942330 | Steel tube 80 x 80 x 8 mm (2 m) | No | 34 kg | | 100942340 | Steel tube 80 x 80 x 8 mm (3 m) | No | 50 kg | | 100942350 | Cable duct (0,5 m) | No | 1.35 kg | | 100942360 | Cable duct (1 m) | No | 2.92 kg | | 100942370 | Cable duct (2 m) | No | 6.06 kg | | 100942380 | Cable duct (3 m) | No | 9.2 kg | | 499000200 | Top-flange type B | No | 1.15 kg | | 499000300 | Top-flange type A | No | 1.33 kg | | 499066010 | Top-mounted joint | Yes | 17 kg | | 499067010 | Intermediate joint | Yes | 16 kg | | 499070010 | Wall hinge | Yes | 19 kg | | 499071110 | Angle (FH) | No | 11 kg | | 499071200 | Angle (AS) | No | 3.47 kg | | 499073010 | Coupling | Yes | 5.25 kg | | 499074010 | Base / wall flange | No | 6.96 kg | | 499075010 | Angle coupling | Yes | 5.77 kg |
|---|
HMI SOLUTIONS
This supporting-arm system, based on steel tubes of an outer diameter of 48 mm, features all the potentials of a modular system.
HMI SOLUTIONS
The GT 50/2, GT 60/2 and GT 80/2 square-section tubular steel systems, all based on square-section tubular steel with edge lengths of 50 mm, 60 mm and 80 mm, incorporate all the potentials of a modular system and cover the upper load range.
HMI SOLUTIONS
The GT 50/2, GT 60/2 and GT 80/2 square-section tubular steel systems, all based on square-section tubular steel with edge lengths of 50 mm, 60 mm and 80 mm, incorporate all the potentials of a modular system and cover the upper load range.
HMI SOLUTIONS
The GT 50/2, GT 60/2 and GT 80/2 square-section tubular steel systems, all based on square-section tubular steel with edge lengths of 50 mm, 60 mm and 80 mm, incorporate all the potentials of a modular system and cover the upper load range.