GT 60/2

The GT 50/2, GT 60/2 and GT 80/2 square-section tubular steel systems, all based on square-section tubular steel with edge lengths of 50 mm, 60 mm and 80 mm, incorporate all the potentials of a modular system and cover the upper load range.

The components for joining of the profiles consist of cast aluminium, and can be easily assembled by means of  clamping screws together with the tubes to make complete supporting-arm systems.  

Maximum load for a reach of 1.00 m is:

  • on the GT50/2:                   100 kg
  • on the GT60/2:                   125 kg
  • on the GT80/2:                   150 kg
Included in delivery

Individual system components incl. assembly materials

Technical Data

Material

Connecting tube: square steel tube similar to DIN EN 10305-5

Wall thickness 5 mm

Components: DIN EN 1706 EN AC-AlSi12 (Fe)

Colour

Powder coating, Tube: galvanized, Components: RAL 7043, traffic grey B, special colour on request

Ingress protection

IP 65 to EN 60529

Seals

CR and/or NBR

Free cable passage

25 cm2 (50 x 50 mm)

BelastungsdiagrammBelastungsdiagramm

Product Range
ProduktbildOrder-No.TypePDF3DDatasheetAccessoriesInquiry
10.09 41 57 Steel tube (variable length)

10.09 42 23 Steel tube (0,5 m)

10.09 42 24 Steel tube (1 m)

10.09 42 25 Steel tube (2 m)

10.09 42 26 Steel tube (3 m)

49.61 00 04 Column

49.61 62 00 Console coupling DN

49.61 66 00 Top mounted joint

49.61 67 00 Intermediate joint

49.61 70 00 Wall hinge

49.61 73 00 Coupling

49.61 74 00 Foot stand, cast steel

49.61 75 00 Angle coupling

49.61 76 00 Console adapter 30°

49.61 77 00 Flange coupling

49.61 78 00 Angle flange coupling

49.61 79 00 Adapter flange for wall joint

49.61 80 00 Angle, cast steel

49.61 80 10 Signal fitting