SL 3000

SL 3000 – the robust enclosure

The SL 3000, thanks to the use of double-shell aluminium profiles, is a particularly robust control enclosure.

Four profile depths, of 70 mm, 125 mm, 170 mm and 220 mm, are available and can be combined with each other. This makes it possible to configure the SL 3000 highly individually to conform to customers' wishes, including the fitting of doors which open to the front or to the back, for example.

The use of double-shell profiles and the facility for combination of the profiles with each other makes possible the creation of especially large control enclosures up to a maximum of 1,500 mm x 1,500 mm x 675 mm in Degree of Protection IP 65.

Displays, control systems, buttons and membrane keypads can be installed via the front panel.
The SL 3000 also permits direct accommodation of control systems, omitting the front panel.

In addition, the side profiles and the rear panel can also be used for the installation of additional components, such as interface inserts, for example.

For the SL 3000, ROSE also provides an individual preparation service, extending from machining, equipping in acc. with the customer's specifications, up to and including a customised paint finish.

Applications

  • Industrial control units and PCs
Included in delivery

Enclosure body with rear wall, fixing elements, cover profile with corners

Technical Data

Material

Profile: DIN EN 573 EN AW-AlMgSi

Cast corner: DIN EN 1706 EN AC-AlSi 12 Cu 1 (Fe)

Colour

Powder coating, optional RAL 7035, light grey or, natural anodized, special colour on request

Ingress protection

IP 65 to EN 60529

Seals

CR and/or PU foam

Temperature range

-30°C to +80°C

Bestellformular

SL3000

Product Range
Order-No.Tecnical DrawingTypeDatasheetAccessoriesInquiry
20.30 99 99

SL 3000


Mounting set10.03 31 01

Keyboard drawer10.99 20 01

mousepad surface10.99 20 02

Fixing set20.60 10 01for front panel, M4 (Set = 12 pcs)

Fixing set20.60 10 02for front panel, M5 (Set = 12 pcs)

Fixing set20.60 10 03 for front panel (Set = 12 pcs)

Coupling flange20.60 10 07GT 48/2 / GTK electronic

FCP - Foil Control Panel20.60 10 50FCP 240/3

FCP - Foil Control Panel20.60 10 51FCP 335/6

FCP - Foil Control Panel20.60 10 52FCP 483/8

Locking plate20.60 30 01powdered GT 48/2 and GTK electronic

Locking plate20.60 30 02powdered GT 50/2 und GT 60/2

Locking plate20.60 30 03powdered GT 80/2

Locking plate20.60 30 04powdered GTK 80

Locking plate20.60 30 05powdered GTN II

Locking plate20.60 30 11anodized GT 48/2 and GTK electronic

Locking plate20.60 30 12anodized GT 50/2 and GT 60/2

Locking plate20.60 30 13anodized GT 80/2

Locking plate20.60 30 14anodized GTK 80

Locking plate20.60 30 15anodized GTN II

Handle20.60 40 02Length 250 mm for front plate 265-314 mm

Handle20.60 40 03Length 300 mm for front plate 315-364 mm

Handle20.60 40 04Length 350 mm for front plate 365-414 mm

Handle20.60 40 05Length 400 mm for front plate 415-464 mm

Handle20.60 40 06Length 450 mm for front plate 465-514 mm

Handle20.60 40 07Length 500 mm for front plate 515-614 mm

Handle20.60 40 09Length 600 mm for front plate 615-664 mm

Handle20.60 40 10Length 650 mm for front plate 665-714 mm

Handle20.60 40 11Length 700 mm for front plate 715-764 mm

Handle20.60 40 12Length 750 mm for front plate 765-814 mm

Handle20.60 40 13Length 800 mm for front plate from 815 mm

Insert bayxxxx_SchiebeschachtAvailable for Profiles 2, 3 and 4 . The ingress protection is determined by the fitted equipment.<br/>It is possible to modify the interior enclosure panel walls individually. The size of the enclosure<br/>gives the maximum connector area.<br/>In the case

Linking barxxxx_TrennstegFor installation of two or more front panels into one enclosure

Other accessories see Commander system accessoriesxxxx_Weiteres Zubehör siehe Systemzubehör Commander

Console connection setxxxx_console connection set30° or 50° inclination possible depending on assembly.<br/>Standard length 300 mm, larger or smaller lengths on request.

P1 + P1

 

P1 + P2

 

P1 + P3

 

P1 + P2 + P1

 

P3 + P4

 

Profile P1

 

Profile P2

 

Profile P3

 

Profile P3 direct mounting

 

Profile P4

 

Profile P4 direct mounting