GTK 80
Maximum load is 200 kg at a reach of 1.20 m.
The system consists essentially of square-section steel tubes with an edge length of 80 mm and a wall thickness of, optionally, 5 mm or 8 mm.
These steel tubes are embedded in a sectional aluminium extrusion which simultaneously accommodates the cable duct.
The cable duct has a removable cover which can be easily opened to permit installation of cables.
The components consist of cast steel and can be joined to the tubes by means of clamping screws.
System individual components incl. cable duct covering and assembly material
Material |
Connecting tube: square ST 37 to DIN EN 10305-5 Wall thickness 5 mm and/or 8 mm Components: spheroidal graphite cast iron and/or cast aluminium Cable duct / cover: aluminium extruded profile Bearing: ball bearing Bellow: textile fabric |
---|---|
Colour |
Powder coating, Cable duct / caps: RAL 7035, light grey, Components: RAL 7043, traffic grey B, special colour on request |
Ingress protection |
IP 54 to EN 60529 |
Seals |
CR and/or NBR |
Free cable passage |
57 cm2 |
Belastungsdiagramm | ![]() |